MV Agusta Brutale 990 R Workshop Manual page 86

Trip reset
To reset "TRIP 1" and "TRIP 2", proceed as follows.
The display modes may be changed or set
B
when the engine is off, the gears are in neu-
tral, the motorbike is stationary, and with
your feet on the ground. Do not change the
display while driving.
- Access "RUN" and press "SET" for more than four
seconds until "RUN MENU" appears.
- Press "SET" for less than four seconds until "TRIP 1
RESET" appears.
- Press "OK" for more than four seconds; "TRIP 1"
starts blinking.
Maintenance
- 70 -