Insert the brake lines in the clips (2) and (3) on the front
mudguard.
Remove the front stand and rest the front wheel on the
ground.
While pulling the front brake lever, push down on the
front suspension two or three times to allow the right-
hand fork rod to position itself properly.
Tighten the right (4) and left (5) fork foot screws.
Tighten the screws to the specified torque
N.B.
in several steps and in an alternate pattern.
Torque pressure: 12 ÷ 14 Nm
Suspension and wheels
- 11 -
3
2
4
5
12 ÷ 14 N•m
F