Color Toner Supply - Toshiba e-STUDIO281c Service Manual
Hide thumbs
Also See for e-STUDIO281c:
- Service handbook (679 pages) ,
- Service manual (412 pages) ,
- Colour manual (8 pages)
Table of Contents
Advertisement
12.5.4
Color toner supply
1) The color developer unit whose toner needs to be supplied moves to the developing position.
2) The developer unit is driven and the toner is supplied for a regulated period of time.
3) The drive is stopped and the unit moves to the color toner density detection position to detect the
density.
4) When the toner density detected is higher than the regulated value, it moves to the escape position.
When the toner density detected is lower than the regulated value, it repeats the procedure 1 to 3 for
five times. If the toner density is still lower than the regulated value, it is judged as "toner empty" and
the unit moves to the escape position.
5) Procedure 1 to 4 is repeated for other color developer units when the toner supply is needed.
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
12 - 13
e-STUDIO281c/351c/451c
DEVELOPER UNIT
12
Advertisement
Table of Contents
