Disassembly And Replacement - Toshiba e-STUDIO281c Service Manual

8.7

Disassembly and Replacement

[A] Laser optical unit
(1) Take off the rear cover-2.
( P.2-32 "[S] Rear cover-2")
(2) Take off the LGC board cover.
( P.2-37 "[E] LGC board (LGC)")
(3) Disconnect 2 connectors from the LGC
board.
(4) Release the harnesses from the harness
clamp.
(5) Take off the left cover.
( P.2-29 "[K] Left cover")
(6) Remove 2 screws and take off the toner
cover.
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Fig. 8-10
Fig. 8-11
Toner cover
Fig. 8-12
8 - 11
e-STUDIO281c/351c/451c
LASER OPTICAL UNIT
8