Toshiba e-STUDIO281c Service Manual page 136

During READY status
Press [HELP] Displays HELP screen
button
Press [START] Displays "COPYING"
button with the
original set on
RADF
Printing out
the copy
Press [ENERGY Display not
SAVER] button changed
Press Displays depart-
[ACCESS] button ment code entry
screen (when
department man-
agement is avail-
able)
Press Displays print job
[JOB STATUS] list screen
button
Press Display not
[INTERRUPT] changed (LED
button blinking)
Press Copy mode is
[FUNCTION cleared after the
CLEAR] button copy mode is set
after setting the
copy mode
Press Printing out
[STOP] button stops, and
"READY Press
START to copy"
and "MEMORY
CLEAR" are dis-
played
Press [CLEAR] Number of print-
button after set- outs changes to
ting the copy 1 while the set-
mode ting remains
unchanged after
the copy mode is
set
Press [CLEAR] Number keyed in
button after key- changes to 1
ing in numbers after being
(digital keys) entered
Press [MONI- Display not
TOR/ PAUSE] changed
button
Press [FAX] Displays FAX
button screen
e-STUDIO281c/351c/451c
CONTROL PANEL
During warming-up
Displays HELP screen
"Wait Warming Up Auto
Start" is displayed
During paper When
jam interrupting
Display not Display not
changed changed
Display not Displays
changed department
code entry
screen (when
department
management is
available)
Display not Displays print
changed job list screen
Display not Returns to the
changed status before
interrupting
Display not Copy mode is
changed cleared after
the copy mode
is set
Display not Display not
changed changed
Display not Number of
changed printouts
changes to 1
while the set-
ting remains
unchanged
after the copy
mode is set
Display not Number keyed
changed in changes to 1
after being
entered
Display not Display not
changed changed
Display not Display not
changed changed
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
5 - 10
Scanning original/
Auto job start
Scanning original and
reserved
printing out the copy
Display not Display not changed
changed
Display not Display not changed
changed
When displaying During energy
HELP screen saving mode
Switches to energy Energy saving
saving mode mode is cleared
and displays
BASIC screen
Displays depart- Display not
ment code entry changed
screen (when
department man-
agement is avail-
able)
Displays print job Display not
list screen changed
Switches to inter- Display not
rupting mode changed
Displays BASIC Display not
screen after the changed
copy mode is set
and then cancelled
Display not Display not
changed changed
Number of print- Display not
outs changes to 1 changed
while the setting
remains
unchanged after
the copy mode is
set
Number keyed in Display not
changes to 1 after changed
being entered
Display not Display not
changed changed
Displays FAX Displays FAX
screen screen