Toshiba e-STUDIO281c Service Manual page 244

[K] Registration sensor (S22)
(1) Take off the registration guide (
"[G] Registration guide").
(2) Remove 1 screw and take off the bracket.
(3) Remove the sticker and disconnect 1 con-
nector. Release 2 latches and take off the
registration sensor.
[L] Registration roller
(1) Take off the front right cover (
Front right cover").
(2) Take off the registration guide (
"[G] Registration guide").
(3) Remove 2 screws and take off the bracket.
(4) Remove 1 screw and take off the cover.
e-STUDIO281c/351c/451c
PAPER FEEDING SYSTEM
P.10-28
Connector
Registration sensor
P.2-28 "[J]
P.10-28
Bracket
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
10 - 30
Fig. 10-68
Fig. 10-69
Cover
Fig. 10-70