Toshiba e-STUDIO281c Service Manual page 268

Hide thumbs Also See for e-STUDIO281c:

Table of Contents

Release 2 latches and take off the front posi-

tion switch arm.

Remove 1 screw and take off the rear posi-

tion switch arm.

Disconnect 2 connectors and take off the

front position detection switch and the rear

position detection switch.

[O] Toner bag full detection sensor (S20)

Take off the process unit

P.11-10 "[B] Process unit").

Disconnect 1 connector and remove 1 screw.

Then take off the toner bag full detection

sensor with its bracket.

e-STUDIO281c/351c/451c

DRUM RELATED SECTION

Front position

Toner bag full detection sensor

Rear position

E-studio351c E-studio451c