Disassembly And Replacement - Toshiba e-STUDIO281c Service Manual

13.7 Disassembly and Replacement

[A] Color toner cartridge sensor (S9)
(1) Take off the maintenance tray (
Maintenance tray").
(2) Disconnect 1 connector. Loosen 1 screw and
take off the color toner cartridge sensor with
the whole bracket.
(3) Disconnect the connector and remove
1screw and then take off the toner cartridge
sensor.
[B] Internal cooling fan (M20)
(1) Take off the inner tray (
tray").
(2) Disconnect 1 connector and remove 2
screws. Then take off the internal cooling fan
together with the duct.
e-STUDIO281c/351c/451c
REVOLVER UNIT
P.2-25 "[B]
P.2-26 "[C] Inner
13 - 8
Color toner cartridge sensor
Fig. 13-4
Color toner cartridge sensor
Fig. 13-5
Duct
Fig. 13-6
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved