(5)
Remove 1 screw and the ground wire, and
then disconnect 2 connectors (3 if the
optional damp heater is installed).
(6)
Remove 2 screws and take off 2 fixing brack-
ets on the rear side.
(7)
Take off the lower drawer of the equipment
and PFP upper drawer.
e-STUDIO281c/351c/451c
OUTLINE OF THE MACHINE
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
2 - 48
Fig. 2-86
Fixing bracket
Fig. 2-87
Fig. 2-88