Toshiba e-STUDIO281c Service Manual page 301

[F] Color auto-toner sensor (S10) / Color auto-toner sensor shutter solenoid (SOL1)
(1) Take off the maintenance tray (
Maintenance tray").
(2) Disconnect 1 connector. Loosen 2 screws
and then take off the color auto-toner sensor
unit.
(3) Disconnect 1 connector, remove 2 screws
and take off the color auto-toner sensor shut-
ter solenoid.
(4) Remove 2 screws and 1 spring and take off
the stay.
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
P.2-25 "[B]
Color auto-toner sensor unit
Spring
Stay
12 - 31
Fig. 12-58
Shutter solenoid
Fig. 12-59
Fig. 12-60
e-STUDIO281c/351c/451c
DEVELOPER UNIT
12