(4)
Pull out the hinge assembly from the bypass
tray.
[A-3]
SFB board (SFB)
(1)
Take off the hinge assembly
(
P.10-10 "[A-2] Hinge assembly").
(2)
Remove 3 screws, release 4 latches and 3
hooks, and take off bypass tray upper cover.
(3)
Remove 1 screw for the plate spring. And
remove 1 screw on the tray side and take off
the bracket.
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Fig. 10-13
Fig. 10-14
Plate spring
Fig. 10-15
10 - 11
Hinge assembly
Bypass tray upper cover
Bracket
e-STUDIO281c/351c/451c
PAPER FEEDING SYSTEM
10