Toshiba e-STUDIO281c Service Manual page 57

[E] LGC board (LGC)
(1) Take off the rear cover-2 (
cover-2").
(2) Loosen 13 screws and take off the LGC
board cover.
(3) Disconnect 21 connectors.
(4) Remove 4 screws, release 2 lock supports,
and then take off the LGC board.
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
P.2-32 "[S] Rear
2 - 37
LGC board cover
Fig. 2-54
Fig. 2-55
Fig. 2-56
e-STUDIO281c/351c/451c
OUTLINE OF THE MACHINE
2
LGC board