Toshiba e-STUDIO281c Service Manual page 391

[B] ADU inside rear cover
(1) Take off the ADU.
( P.17-12 "[A] Automatic Duplexing Unit
(ADU)")
(2) Remove 2 screws and take off the ADU
inside rear cover.
[C] ADU opening/closing switch (S37)
(1) Take off the ADU.
( P.17-12 "[A] Automatic Duplexing Unit
(ADU)")
(2) Take off the ADU inside rear cover.
( P.17-13 "[B] ADU inside rear cover")
(3) Disconnect the connector and release the
latch to take off the ADU opening/closing
switch.
[D] ADU board (ADU)
(1) Take off the ADU inside rear cover.
( P.17-13 "[B] ADU inside rear cover")
(2) Disconnect 6 connectors from the ADU
board. Release 3 lock supports and take off
the ADU board.
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
ADU inside rear cover
Fig. 17-11
ADU opening/closing switch
Fig. 17-12
ADU board
Fig. 17-13
17 - 13
e-STUDIO281c/351c/451c
AUTOMATIC DUPLEXING UNIT (ADU)
17