Toshiba e-STUDIO281c Service Manual page 72

(9) Remove 4 screws and take off 2 fixing brack-
ets on the front side.
(10) Lift up the equipment and take off the LCF.
[D] MJ-1022 (Hanging finisher) <When PFP/LCF is not installed>
(1) Turn OFF the power and unplug the power
cable.
(2) Take off the connector cover and disconnect
the connector.
e-STUDIO281c/351c/451c
OUTLINE OF THE MACHINE
Fixing bracket
Connector cover
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
2 - 52
Fixing bracket
Fig. 2-98
Fig. 2-99
Fig. 2-100