Toshiba e-STUDIO281c Service Manual page 267

(2) Remove 1 screw and take off the gear
bracket.
Remove 1 screw and take off the motor
guide.
(3) Disconnect 1 connector and remove 2
screws. Then take off the charger cleaner
motor from the motor bracket by rotating it
upward.
[N] Charger cleaner position detection switch (S25/S26)
(1) Take off the discharge LED unit
( P.11-20 "[L] Discharge LED (ERS)").
(2) Remove 1 screw and separate the discharge
LED unit into 2 sections.
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Motor guide
Fig. 11-39
Fig. 11-40
Fig. 11-41
11 - 21
Gear bracket
Charger cleaner motor
e-STUDIO281c/351c/451c
DRUM RELATED SECTION
11