16.5.5
Abnormality in the IH control circuit
When an abnormality is detected in the IH control circuit, it stops the power supply to the IH coil and
displays a message "Call for service".
1) IH control circuit
CPU output level of the IH control circuit changes depending on the condition of IH coil. This output
level goes through the photocoupler into the gate array.
LGC board
Gate array
e-STUDIO281c/351c/451c
FUSER UNIT / PAPER EXIT SECTION
IH board
+5VSW
H1ERR1
H1ERR2
Fig. 16-5
16 - 10
VDD
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
CPU