Disassembly And Replacement - Toshiba e-STUDIO281c Service Manual

10.6 Disassembly and Replacement

[A] Bypass unit
[A-1] Bypass unit
(1) Take off the right front hinge cover
( P.2-28 "[I] Right front hinge cover").
(2) Take off the right rear hinge covers
( P.2-31 "[P] Right rear hinge cover").
(3) Remove 1 screw of ground wires. Discon-
nect 1 connector and release the harnesses
from 2 harness clamps.
(4) Remove 1 screw (M4*12). Open the bypass
feed tray and take off the bypass feed front
cover.
(5) Remove 1 screw. Open the bypass feed tray
and take off the bypass feed rear cover.
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Ground wire
Fig. 10-7
Bypass feed front cover
Fig. 10-8
Bypass feed rear cover
Fig. 10-9
10 - 9
05/08
Connector
e-STUDIO281c/351c/451c
PAPER FEEDING SYSTEM
10