Adjusting The Master-Making Position [Binding Margin] - Riso SE 9480 User Manual

Functions for Master-Making
Adjusting the Master-Making position
[Binding Margin]
You can make a master by putting the binding margin on either the top, bottom, left and right of the original. The
adjustable range is from 0 to 50 mm (0.0" to 1
Important!:
• "Binding margin" is a function for adjusting the master-making position and not a function for adding a binding mar-
gin.
• When the original has no margin, the image may extend out of the area for master-making. The part that is outside
the master-making area is not used for master-making.
• The position of the binding margin is the side that appears first when printed copies are discharged to the Paper
Receiving Tray.
• The binding margin can be set to either the Top, Bottom, Right, and Left of printed copies.
• When auto reproduction is set, move the image to where it should appear after the magnification has been
adjusted.
• This function is available with "Auto 90°Rotation" and Rotate".
Note:
• When the Print Position Adjustment on the control panel is used in combination with the binding margin, the Output
Print Position can be moved up to approx. 65 mm (2
to the position of the original image.
• This function cannot be used with the following functions.
– Multi-Up Print
– 2 Up
– Overlay
– Scanning Side -ADF
– Layout
1
Touch [Binding Margin] on the Func-
tions Screen.
Ready to Make Master
Basic Selections
Top Margin
Binding Margin
Max. Scan
Reservation
88

Adjusting the Master-Making position [Binding Margin]

31 / ") on the top, bottom, left and right.
32
Functions Admin.
ADF Semi-Auto
Preview
Overlay
Storage Memory
P . 2/4
9 / ") vertically and 60 mm (2
16
2
Touch [Top], [Bottom], [Left],
[Right] for the desired adjustment.
23 / ") horizontally with respect
64