Erasing Shadows When Printing - Riso SE 9480 User Manual

Erasing Shadows when Printing

1
Touch [Book Shadow] on the Func-
tions Screen.
Ready to Make Master
Basic Selections
Program
Job Memory
Dot Process
Contrast Adj
2
Touch [Erase] or [Halftone] for
"Process".
• [OFF]: Book Shadow is not performed.
• [Erase]: Erases shadows near the center and
around the original.
Select the size of spread original from "Page
Size".
• [Halftone]: Photo processes the center
shadow for a natural feel and deletes shadows
that it can around the original.
3
Touch [Erasure Width] and [Page
Size].
• If you set "Process" to "Halftone", you can only
select "Auto".
• If you set "Erasure Width" to "Auto", original
detection is performed automatically, and the
erasure width is calculated from the detected
size.
Functions Admin.
Tone Curve
Multi-Up Print
2 Up
Book Shadow
P . 1/4
Functions for Master-Making
• If you specify the erasure width, original detec-
tion is not performed automatically. Touch [Era-
sure Width], and then touch the [Page Size] for
the magazine or book you have placed.
Note:
• If you also select "Page split", you can print the
left and right pages of a bound original sepa-
rately. See "Splitting Facing Pages of a Bound
Original when Printing" ( p.86).
4
Touch [OK].
Returns to the Functions Screen. "Book Shadow"
setting is updated.
Printing from Bound Documents [Book Shadow]
85