Riso SE 9480 User Manual page 255

Problem
Paper is not smoothly fed from
the Paper Feed Tray.
(Skipped paper, or multiple-
sheet feeding)
The back of the printed card is
peeling, or the leading edge
gets wrinkled.
An error message displays
even though there is no paper
jam.
When printing a multiple page
computer file, the machine
repeats the master-making
process one page at a time.
Possible Cause
Paper handling pressure is not
correctly adjusted.
The Paper Feed Adjustment on the
Functions Screen is not properly set.
The angle of the Stripper Plate is in
appropriate
Is the lifted paper getting ejected at
the second rotation of the Print Drum
(Cylinder)?
Is sunlight directly hitting the
machine?
Is "Print in Units" option selected in
the Printer Driver?
Action
• For paper that easily creates paper
powder, skips, or for the back side of
postcards that is turn up:
Turn the dial to the left.
: Normal
: Strong
: Medium
: Weak
• If paper is being multi-fed:
Turn the dial to the right.
Important!:
• Before making the adjustment, be sure
to remove all papers from the Paper
Feed Tray and confirm that the tray has
lowered to the bottom.
Adjust the "Paper Feed Adj.". Contact your
dealer (or authorized service
representative) for details on making the
adjustment.
Turn the Stripper Plate Angle Adjustment
Dial to adjust the angle.
Check the printed copy, and if the top
margin is less than 5 mm (
lower Print Position.
The sensor is affected by direct sunlight.
Install shades or curtains, or move the
machine out of direct sunlight.
Delete the current print job. Deselect "Print
in Units", and resend the data to the
machine.
See p.48, step 3.
p.55
Troubleshooting
/ "), slightly
3
16
253
Troubleshooting