Riso SE 9480 User Manual page 27

20 21 19 18 17
13 14 15 16
13)
Start Key
Starts master-making, print processing, or executes
specified operations.
The key lights up only when the key is active.
14)
Proof Key ( p.102)
Use when you want to check the print result after adjust-
ing the print position, for example.
This allows you to print proof copies without affecting the
value on the Print Quantity Display.
15)
Stop Key
Stops current operation in progress. During the master-
making procedure, the machine will not stop until the
master-making process is completed.
16)
Reset Key
Returns all settings to the initial settings, and clears the
error screen on the display after a system error has been
resolved.
17)
Wake-Up Key
Wakes up the printer in Energy Saving mode.
Also use this key to log out from the machine.
18)
Auto-Process Key ( p.66)
Performs non-stop operation from master-making
through printing. When activated, the indicator besides
the key lights up.
19)
Print Key
Makes the printer ready for printing.
20)
Master-Making Key
Makes the printer ready for making masters.
21)
Progress Arrows
Indicates master-making and printing progress status.
Ready to make a master (Auto ON): when 1 is lightening
Ready to make a master: when 1,2 are lightening
Ready to print: when 3,4 are lightening
The indicator increases one bar at a time from the left,
indicating the progress of the current master-making or
printing job.
• Indicator 1 or 3 blinks during the master-making/print-
ing operation.
• If a master-making or printing job is halted, the
progress bar stays lit at that position. (Ready to
resume)
Getting Acquainted
1)
Master-Making
Indicator
2)
Master-Making
Stop Bar
3)
Print Indicator
4)
Printing Stop Bar
Control Panel
25