Cutting The Top Margin Of The Original And Printing [Top Margin] - Riso SE 9480 User Manual

Cutting the Top Margin of the Original and
Printing
[Top Margin]
You can cut the top portion of the margin to between 0 to 99 mm (0.0" to 3.9") and make a master.
This feature enables you to skip the Registration marks
of these marks.
* About the Registration Mark
In the field of commercial printing, it is normal to print on paper that is larger than the finished size and then cut down to
the finished size afterwards. The symbol that indicates the position to cut in this event is known as the registration mark.
Important!:
• When you are setting the "Size", magnify/reduce using the area that skips the set value.
• Do not use "Auto Reproduction Size".
• This function cannot be used with "Multi-Up Print" or "2 Up".
1
Place an original.
Place the original face down on the Glass Platen.
Align center on the top edge, and close Platen
Cover. p.41
2
Touch [Top Margin] on the Func-
tions Screen.
Ready to Make Master
Basic Selections
Top Margin
Binding Margin
Max. Scan
Reservation
3
Touch [ON].
Ready to Make Master
Top Margin
Basic Selections
The top margin of
originals can be cut
by a specified range
OFF
O N O N
(Numeric keypad is available for input)
Functions Admin.
ADF Semi-Auto
Preview
Overlay
Storage Memory
P . 2/4
Cancel OK
Functions Admin.
0
mm
(0-99)
P. 2 / 4

Cutting the Top Margin of the Original and Printing [Top Margin]

* on the original and print on the finish-sized paper without any
4
Touch
width.
Ready to Make Master
Top Margin
Basic Selections
The top margin of
originals can be cut
by a specified range
OFF
O N O N
(Numeric keypad is available for input)
You can set from 0 to 99 mm (0.0" to 3.9").
Note:
• Print Quantity Keys can also be used to enter a value.
5
Touch [OK].
Returns to the Functions Screen. "Top Margin"
setting is updated.
Functions for Master-Making
or to specify the cut
Cancel OK
Functions Admin.
0 mm
(0-99)
P. 2 / 4
87