Operation For Multi-Up Tickets - Riso SE 9480 User Manual

Functions for Master-Making

Operation for Multi-Up Tickets

For "Multi-Up Tickets", the specification of the short edge size of the original (the width) is used to calculate the num-
ber of images that can be printed on one sheet of paper (print paper size divided by short edge size of the original).
A ticket width of between 50 mm (2") and 210 mm (8
Ex.)
Short edge of the original 50 mm (2")
Long edge of the print paper 297 mm (11
297÷50=5 (11 / "÷2"=5) with a remainder of 47 mm (1
11
16
In this example, 5 images print on one sheet of paper.
More than
5mm (3/16")
1
Set the original and print paper.
Place the original on the Glass Platen.
Important!:
• Pay attention to the orientation of the original.
• Make sure to load paper as shown below.
2
Touch [Multi-Up Print] on the Func-
tions Screen.
Ready to Make Master
Basic Selections
Program
Job Memory
Dot Process
Contrast Adj
78
Printing Multiple Originals on One Sheet [2 Up] [Multi-Up Print]
/ ") (A4 size)
11
16
original 50mm (2")
Paper output
direction
Functions Admin.
Tone Curve
Multi-Up Print
2 Up
Book Shadow
P . 1/4
/ ") can be specified.
4
16
/ ")
11
16
Printed paper 297mm (11
Blank
3
Select the Page Size.
Touch the Page Size same as the original and
touch [Next].
(In "Multi-Up Tickets", the Page Size selection will
not affect the rest of the procedures.)
Ready to Make Master
Page Size
Basic
A3
B4
A4
A4
Reproduction Size is set automatically and Multi-
Up Print screen is displayed.
11
/ ")
16
Paper output
direction
Cancel Next>
Selections Functions Admin.
B5
B5
P .1 / 4