Riso SE 9480 User Manual page 182

Advanced Features
Tip:
Printing on Extended Paper
The machine can print on paper 436 mm-555 mm
(17 "-21
5 / 27
32
paper feeding direction) by storing the size as a
custom-size.
p.178
When entering a size longer than 436 mm (17
(top to bottom facing the paper feed direction) on
the Custom Paper Entry Screen, the paper will be
treated as "Extended Paper".
When "Extended Paper" is selected on the Feed
Tray (Paper) screen, the machine switches into
"Extended Paper" mode.
Important!:
• Some Extended Paper may fail to pass through
the machine due to its paper characteristics, or
may get smudged with Ink due to its image
positioning. Consult your dealer (or authorized
service representative) for advice.
"Extended Paper" Mode
• When the machine is on "Extended Paper"
mode, it is indicated in the message area as
either "Ready to Make Master <Ext.Paper>" or
"Ready to Print <Ext.Paper>".
• On "Extended Paper" mode, the machine can
print papers measuring 436 mm-555 mm
(17 "-21
5
/
32
facing the paper feed direction. However, max-
imum printing area and top/bottom Print Posi-
tioning range remains as usual.
p.19
p.100
• Print timing and speed is different on "Extended
Paper" mode in comparison to normal printing.
This is to be expected, so do not be alarmed.
• Contact your dealer (or authorized service rep-
resentative) for suggestions about placing
paper on the Paper Receiving Trays when on
"Extended Paper" mode.
180
Registering a Custom Paper Size [Custom Paper Entry]
/ ") long (top to bottom facing the
32
/ ") lengthwise from top to bottom
27
32
5 ")
/
32