Table of Contents
Advertisement
Troubleshooting
Problem
Paper gets jammed in the Auto
Document Feeder DX-1
(option).
Printed copies are not neatly
aligned in the Paper Receiving
Tray.
250
Troubleshooting
Possible Cause
There is any paper caught in the Auto
Document Feeder DX-1.
The positions of the Receiving Tray
Paper Guides and the Paper Stopper
are inappropriate.
The Paper Arrangers are not properly
set.
The Paper Feed Pressure
Adjustment Lever is positioned
incorrectly.
Action
Removing originals jammed in the
original reversal unit
Open the auto document feeder cover
(
), and raise the document tray as
shown in (
).
Pull out the original (
).
Removing originals jammed in the
original receiving unit
Lift the Platen Cover Pad up (
the release lever toward you (
pull out the original (
).
Adjust the Receiving Tray Paper Guides
and the Paper Stopper to the size of
paper. For thick paper, slightly widen them
as necessary.
If you have adjusted the horizontal
position on the Paper Feed Tray, shift the
Receiving Tray Paper Guides in the same
direction.
p.37
Set the Paper Arrangers properly.
p.37
If the Paper Feed Pressure Adjustment
Lever is set to "Thick Paper", printed
copies may not be correctly aligned when
using standard paper.
Set the Paper Feed Pressure Adjustment
Lever to "Standard".
p.34
), and pull
), and
Advertisement
Table of Contents
Troubleshooting
