Adjusting The Auto-Control Stacking Tray (When Using The Optional Auto-Control Stacking Tray) [Receive Tray] - Riso SE 9480 User Manual

Functions for Printing
Adjusting the Auto-control Stacking Tray
(when using the optional Auto-control Stacking Tray) [Receive Tray]
1
Touch [Special Paper Ctrl] on the
Functions Screen.
Select Print Quantity
Basic Selections
Auto Page Renewal
Sorter
Job Separation
Special Paper Ctrl
2
Touch [Receive Tray].
Special Paper Ctrl
Paper Feed Adj.
Paper Eject Adj
Receive Tray
3
Touch the relevant adjustment but-
tons.
Special Paper Ctrl
R e c e i v e T r a y
Auto
Paper Feed Adj.
Side
Paper Eject Adj.
0mm
Wider
Narrower
Reseive Tray
112
Paper Feed/Output Settings for Special Paper and Printing Types [Jump Wing Control] [Special Paper Ctrl]
Functions Admin.
Counter Display
Scanning Side -ADF
P . 4/4
Close
Entry/Call Revise
S-Tray Upper Limit Auto
Paper-Feed Amount Auto
Air Blow ON
Separation Fan 2
Pre-suction Fan OFF
Suction Fan 4
Side 0mm
End 0mm
Close
Close
Entry/Call Revise
S-Tray Upper Limit Auto
Paper Feed Amount Auto
End
Air Blow ON
0mm
Separation Fan 2
Pre-suction Fan OFF
Wider
Suction Fan 4
Narrower
Side 0mm
End 0mm
Automatic adjustment of the
Receiving Tray Paper Guides/
Stopper
Touch [Auto] to adjust the position of the
Receiving Tray Paper Guides/Stopper auto-
matically to the standard positions for the
paper size.
Detailed adjustments of the
Receiving Tray Paper Guides/
Stopper
Touch either one of the four "Narrower" or
"Wider" buttons to move the Receiving Tray
Paper Guides/Stopper in approximately
0.5 mm ( / ") increments.
1
64
• The adjustment value for the Receiving Tray
Paper Guides is displayed under "Side",
while the Stopper adjustment is displayed
under "End".
• Detailed adjustments will be effective after
paper size is set.
• Touch [Auto] to reset both "Side" and "End"
to the default value of 0 mm (0") and reacti-
vate automatic adjustment.
Note:
• The Receiving Tray Paper Guides (side) can be
widened by pressing the Receiving Tray Paper
Guides' Opening Button during printing.
Buttons, components activated and
direction of movement
Activated
Button
component
Stopper
[ Narrower]
[ Wider]
p.22
Direction
Towards the
machine
Outwards on
the Auto-control
Stacking Tray