Customizing The Default Settings - Riso SE 9480 User Manual

Customizing Default Settings
The default settings can be changed when the machine is not in operation.
Make sure there is no pending or current Print Job operation.
Note:
• If the administrator is registered in User Management, only the administrator can change the [Admin.] settings.
(This operation requires input of the administrator's PIN Code or connection of the registered USB Flash Drive.)
p.120
• On the Admin. Screen, the current setting is displayed on the right side of each button.
1
Touch [Admin.] on the Basic Screen
for each mode.
Ready to Make Master Ready to Make Master
D-Feed D-Feed
Renew Page
Check Check
Black
2
Touch [OK].
Ready to Make Master Ready to Make Master
Note:
• When an administrator is registered in User
Management, the Recognition Screen is dis-
played.
Operate the screen to log in as the administra-
tor. If already identified as the administrator, the
Recognition Screen will not be displayed.
Users other than administrator are prohibited.
Advanced Features
When "Recognized by" is set to
"PIN Code"
Input the administrator's PIN Code using the
Print Quantity Keys and touch [OK].
When "Recognized by" is set to
"USB Flash Drive"
Connect the administrator's registered USB
Flash Drive to the USB slot.
The Admin. Screen is displayed once access
has been identified.
Changing Default Settings [Admin.]
173