Riso SE 9480 User Manual page 53

2)
Touch [Output].
If you want to operate the ID print, touch
[ID Print Job].
p.52
p.193
Document_1.doc Document_1.doc RISO RISO
Document_2.doc RISO
Document_3.doc RISO
The following screen appears.
Ready to Make Master Ready to Make Master
Document_1.doc
Owner: RISO
Date&Time: Nov25,XX 05:30
Format: A4
Black
3)
Press the key.
After making a master, start printing.
Printing with Pause before "Print"
A master is made after receiving the data. The
machine stops after printing a proof copy.
1)
Check the proof copy and adjust the set-
tings as needed.
2)
Press the key.
Printing starts.
Printing with Auto-process "OFF"
1)
Follow steps 1 to 3 in "Pause before "Mas-
ter"".
Stop after making a master and printing a
proof copy.
2)
Check the proof copy and adjust the set-
tings as needed.
3)
Press the key.
Printing starts.
100 100 10 10
200 1
50 2
6
Printing from a Computer Data [Direct Print] [USB Job List]
Note:
• If the data contains multiple pages, repeat the
same steps for each page.
• Entering the number of copies from the Print
Quantity Keys will override the number speci-
fied in the Print dialog box.
• For "ID Print", printing starts with specified Auto
Process mode after recognition.
• To manually stop a job during master-making or
printing operation, press the
making process, the machine will stop after the
master is made. In printing process, the
machine will stop printing.
Press the key to resume the job.
Remove the printed paper.
Open the Receiving Tray Paper Guides and
remove the paper.
Note:
• After printing is completed, the master remains
on the Print Drum (Cylinder). To protect confi-
dential documents from unauthorized duplica-
tion, use the Confidential feature to discard the
master after printing.
p.147
Basic Operations
key. In master-
51