Specifying Stored Size - Riso SE 9480 User Manual

Storing Original Data and Use Method

Specifying Stored Size

Specify the size to save the scanned original.
It is necessary to set the Format size when:
• you place the originals on the Glass Platen
• you set the custom-sized originals in the optional ADF unit
• you want to save at a size that differs from the size of the original
When the standard-sized original is set in the optional ADF unit, the original size is detected automatically. The orig-
inal is saved by original format.
1
Touch [Format] on the Scan Basic
Screen.
Ready to scan data
Page No.1
File Name
Directory
Basic
Page (A4) Contrast
Line
Preview
The Format Screen appears.
2
Touch the paper size button to be
set.
Ready to Make Master
B4
If you select [Auto], the same size as the original
will automatically be set.
Note:
• When Format is set to "Auto", you cannot select
"Auto" under the Size.
192
Converting Hard-copies to Stored Data [Scan Mode]
scan_0001 Owner
2_folder
Owner-1
Functions Admin.
Size Format
Auto
A4
Book
Shadow
3
Touch [OK].
The paper size is confirmed and the screen
returns to the Scan Basic Screen.