Scanning A Hard-Copy Original - Riso SE 9480 User Manual

Scanning a Hard-copy Original

1
Place the original.
Place the original on the Glass Platen or in the
optional ADF unit.
To place the original, see
2
Select a scan mode.
Touch [Scanning] on the Mode Selection Screen.
p.26
The Scan Basic Screen is displayed.
Note:
• After selecting the Scan mode and if the follow-
ing "Format" Screen is displayed, select the
page size (original size) and touch [OK].
Ready to scan data
Page No.1
scan_0001
File Name
1_folder
Directory
Basic Functions
Page (A4) Contrast
Auto
Line
Book
Preview
Shadow
3
Setting data information.
Sets the data name, save location and owner
name.
p.190
4
Setting required functions.
Set the required functions for scanning the origi-
nal.
p.41.
Owner
Owner-1
Admin.
Size Format
B4
Storing Original Data and Use Method
Note:
• You can check scanned data instantly by ena-
bling the "Preview" function. You can also use
this function to check data before saving.
• See the previous section for the functions that
can be set.
Important!:
• Set "Format" when scanning custom-sized orig-
inals.
p.192
5
Press the
The scan starts.
Note:
• After scanning the original, a preview shows on
the display if "Preview" is set.
Check the image on the display and touch
[Close].
6
Repeat steps 1, 4 and 5 if the original
has multiple pages.
Note:
• If multiple originals were placed on the optional
ADF unit, all originals will be scanned at the
same settings.
7
Touch .
Once the original to be saved as one set of data is
scanned, touch
A confirmation screen appears.
8
Touch [Yes].
The data is saved.
When you touch [<Back], the screen returns to
the previous operation.
When you touch [No], the scanned contents are
canceled.
Note:
• Press the
Converting Hard-copies to Stored Data [Scan Mode]
key.
.
key to exit scan mode.
189