Riso SE 9480 User Manual page 38

Basic Operations
Adding or Replacing Paper
When you add paper or replace with paper of a different size at the time of printing, press the Feed Tray Ascent /
Descent Button to lower the Paper Feed Tray.
• The Paper Feed Tray is lowered while you press and hold the button, and
when you release the button, the tray stops at that position.
• When the tray runs out of paper or you remove all papers, the tray is automat-
ically lowered to the bottom.
• After paper has been replenished, the Paper Feed Tray automatically rises
when you press the
Important!:
• When changing to a different paper size, remember to readjust the Receiving Tray Paper Guides and Paper Stop-
per.
• When changing to a different quality paper, remember to adjust the Paper Feed Pressure Adjustment Lever.
Note:
• When the Paper Feed Tray has been lowered to the bottom, if you press this button after paper has been replen-
ished, the Paper Feed Tray rises.
Closing the Paper Feed Tray
Before closing the Paper Feed Tray, remove the paper and widen the Feed Tray Paper Guides to the limits. Then
close the Paper Feed Tray.
36
Preparing to Print
Key on the Control Panel.
Feed Tray Ascent /
Descent Button