Setting Data Information - Riso SE 9480 User Manual

Storing Original Data and Use Method

Setting Data Information

Settings for the data to be scanned and stored are configured on the Scan Basic Screen.
The file name, directory and owner name are automatically allocated when scan mode is started, but you can change
this preset information if needed.
Note:
• Default settings for the "Directory" folder can be changed in "Admin.".
( p.168)
1
Enter a file name.
1)
Touch the file name input box.
Ready to scan data
Page No.1
File Name
Directory
Basic
Page (A4) Contrast
Line
Preview
The Rename screen appears.
2)
Touch the
name.
Rename
scan_0001
Small
Note:
• You can also press the
delete.
3)
Touch the text button and enter the file name.
p.135
4)
Touch [OK].
The file name is confirmed and the screen
returns to the Scan Basic Screen.
190
Converting Hard-copies to Stored Data [Scan Mode]
scan_0001 Owner
1_folder Owner-1
Functions Admin.
Size Format
Auto
A4
Book
Shadow
button to delete the current
Cancel
Capital
2
Specifying a Directory
When saving in the USB Flash Drive, connect the
USB Flash Drive to the USB slot in advance.
Note:
• If the machine is equipped with the optional
1)
Page No.1
File Name
Directory
Page (A4)
OK
2)
key to
RISO Controller IS300, you cannot specify
where to store the data.
Touch the directry input box.
Ready to scan data
Report
1_folder
Basic Functions
Contrast Size
Auto
Line
Book
Preview
Shadow
The Directory Screen appears.
Touch [Storage Memory] or [USB Flash
Drive].
Owner
Owner-1
Admin.
Format
A4