Table of Contents
Advertisement
Before Starting to Use
Originals
Size and Weight Restrictions
Usable originals are as follows.
Used Device Name
Glass Platen
Document Feeder AF-
VI:II (Option)
Document Feeder DX-1
(Option)
* The paper weight limit differs depending on which sides of the original are scanned. Scanning sides can be speci-
fied using "Scanning Side -ADF".
• Originals are scanned according to the size of paper placed on the Paper Feed Tray when masters are made. Posi-
tion the Feed Tray Paper Guides to the same width as the original.
When the paper placed is smaller than the original, the entire original will not be scanned.
When the placed paper is larger than an original, dirt on the glass or shade of the original, may result in unexpected
dirt in the area beyond the size of the original.
• Bound originals can also be used on the Glass Platen.
• You can automatically feed up to 50 original sheets 80 g/m
ument Feeder) unit.
Note:
• Use the Glass Platen when printing the following originals:
– Patched or worn originals
– Wrinkled, curled, folded, or torn originals
– Transparent originals (such as tracing paper or OHP transparencies)
– Chemically treated originals (such as thermal or carbon paper)
– Originals with correction fluid or glue
– Extremely thin originals
Using the optional Auto Document Feeder AF-VI:II: less than 50 g/m
Using the optional Auto Document Feeder DX-1:
less than 40 g/m
– Extremely thick originals
Using the optional Auto Document Feeder AF-VI:II: greater than 128 g/m
Using the optional Auto Document Feeder DX-1:
greater than 128 g/m
plex)
– Heavy drawing paper
– Originals with staples or clips
• If an original is wrinkled, curled, or creased flatten it thoroughly so that the originals can be pressed directly onto
the Glass Platen during processing.
18
Originals
Size
50 mm × 90 mm to 310 mm × 432 mm
" × 3
(1
/
/
31
17
32
32
100 mm × 148 mm to 310 mm × 432 mm
" × 5
(3
/
/
15
13
16
16
105 mm × 128 mm to 297 mm × 432 mm
" × 5
(4
1
/
1
/
" to 11
8
32
p.156
(11-lb bond) (Front Side -> Simplex) / less than 52 g/m
2
(34-lb bond) (Front Side -> Simplex) / greater than 105 g/m
2
" × 17")
" to 12
/
7
32
" × 17")
" to 12
/
7
32
The weight differs depending on the setting
on the scanning side.
<Front Side -> Simplex>*
40 g/m
" × 17")
11
/
16
<Back Side -> Simplex or Duplex ->
Simplex>
52 g/m
(21-lb bond) when using the optional ADF (Auto Doc-
2
Weight
Max. 10 kg (22 lb)
50 g/m
to 128 g/m
2
(13-lb bond to 34-lb bond)
2
to 128 g/m
2
(11-lb bond to 34-lb bond)
to 105 g/m
(14-lb bond to 28-lb bond)
2
2
(13-lb bond)
2
(14-lb bond) (Duplex -> Simplex)
2
(34-lb bond)
2
(28-lb bond) (Duplex -> Sim-
2
2
Advertisement
Table of Contents
Troubleshooting
