Riso SE 9480 User Manual page 236

Troubleshooting
Message
Check Paper Receiving
Tray
Check Stock of
Required Ink and
Please Order If Needed
Check Stock of
Required Master and
Please Order If Needed
Check the Original Size
The Original Size is larger
than Max. Printing Area
Check the Settings
The Selected Reproduction
Ratio will not fit the
Max. Printing Area
Close Platen Cover
If original moves
you may not get
desired result
234
When a Message Displays
Symptom/Action
(Symptom)
Receiving Tray Paper Guides of the
Auto-control Stacking Tray are
incorrectly set.
(Action)
Check the Receiving Tray Paper Guides
of the Auto-control Stacking Tray.
(Symptom)
The remaining quantity of Ink Cartridge
or Master Roll has become less than
specified on "Stock Management".
p.171
(Action)
Order Ink Cartridges or Master Rolls if
necessary.
(Symptom)
As the original size is larger than the
maximum printing area, extra areas may
not be printed.
(Action)
Modify the reproduction size.
(Symptom)
Reproduction size is too large for the
detected original size and exceeds the
maximum printing area.
(Action)
Modify the reproduction size, or set
printing paper of the appropriate size.
(Symptom)
The Platen Cover was opened during
the editing process of the RISO Editor
function.
(Action)
Close the Platen Cover gently.
How to Clear a Pop-Up Message
• When resuming the print job:
Touch [Continue].
(Alternatively, press the
print.)
• When stopping the print job:
Touch [Cancel].
(Alternatively, press the
the key to clear.)
Touch [Close].
(Alternatively, press the
key to clear.)
Touch [Close].
(Alternatively, press the
key to clear.)
• To change the "Size" setting:
Touch [Size Setting].
• When resuming the print job:
Touch [Continue].
(Alternatively, press the
print.)
• When stopping the print job:
Touch [Cancel].
(Alternatively, press the
the key to clear.)
• When changing the "Size" setting:
Touch [Size Setting].
• When resuming the print job:
Touch [Continue].
(Alternatively, press the
print.)
• When stopping the print job:
Touch [Cancel].
(Alternatively, press the
the key to clear.)
When the Platen Cover is closed, the
warning message is erased.
Touch [Close].
(Alternatively, press the
key to clear.)
key to
key or
key or the
key or the
key to
key or
key to
key or
key or the