Riso SE 9480 User Manual page 241

Message
!! The Data Storage Area
has Become Full !!
Clear Old Storage Data
The file size is too large
to store on USB Flash Drive
Change the USB Flash Drive
or delete some files
to make spaces
!! The Number of Storage
Data has Become Full !!
Clear Old Storage Data
in the Selected Folder
The Paper Feed Pressure
Adjustment Lever
is set to "CARD"
Check if the setting is
consistent
with paper in the
Standard Feed Tray
!!The Print Drum (Cylinder) Type
has been Changed!!
Select the Current
Print Drum (Cylinder) Type
Symptom/Action
(Symptom)
Insufficient free space on the Document
Storage Card.
(Action)
Check the stored data and delete
unnecessary jobs.
(Symptom)
Insufficient free space on the USB Flash
Drive.
(Action)
Check the USB Flash Drive data and
delete unnecessary jobs.
(Symptom)
The selected folder is full of data.
(Action)
Check the contents of the folder and
delete unnecessary data.
Alternatively, select another folder.
(Symptom)
The "Paper Feed Adjustment" under
"Administrator Settings" is set to "Auto",
and the Paper Feed Pressure
Adjustment Lever is at the "CARD"
position.
(Action)
Check the paper and adjust the position
of the Paper Feed Pressure Adjustment
Lever as needed.
See "Setting up the Paper Feed Tray
and Loading Paper" Step 4.
p.35
(Symptom)
A different type of Print Drum (Cylinder)
has been installed.
(Action)
Select the type of Print Drum (Cylinder)
currently installed.
Alternatively, change back to the same
type of Print Drum (Cylinder) as before.
p.211
Troubleshooting
How to Clear a Pop-Up Message
Touch [Cancel].
(Alternatively, press the
key to clear.)
• For checking the storage memory:
Touch [Storage Memory].
Touch [Close].
(Alternatively, press the
key to clear.)
• For checking the USB Flash Drive
data:
Touch [USB Job List].
Touch [Close].
(Alternatively, press the
key to stop printing.)
• When checking storage data:
Touch [Storage Memory].
• When resuming the print job:
Touch [Continue].
(Alternatively, press the
print.)
• When stopping the print job:
Touch [Cancel].
(Alternatively, press the
stop printing.)
• When changing a setting:
In the Confirm Print Drum (Cylinder)
Type screen, select the type of Print
Drum (Cylinder) currently installed
and touch [OK].
• When installing a different Print
Drum (Cylinder):
Pull out the Print Drum (Cylinder) and
replace with the same one as before.
When the Print Drum (Cylinder) is re-
installed, the Warning Message will clear.
When a Message Displays
key or the
key or the
key or the
key to
key to
239