Riso SE 9480 User Manual page 245

Screen Display
Consumables Information Input Wizard Consumables Information Input Wizard
Master Information Input
H4 Master Density
1 2 3 4 5
6 7 8 9
Consumables Information Input Wizard Consumables Information Input Wizard
Master Information Input
H5 Print Density Fine Adjustment
1 2 3 4
<Back
Consumables Information Input Wizard Consumables Information Input Wizard
Master Information Input
H6 First Print Density Adjustment
1 2 3 4
<Back
A confirmation screen displays when done.
Consumables Information Input Wizard Consumables Information Input Wizard
Master Information Input
Confirm the input data shown below.
Press the START key if those set values are OK.
Item Value
H4 Master Density
H5 Print Density Fine Adjustment
H6 First Print Density Adjustment
<Back
Press the key to approve selection.
Returns to the Basic Screen.
[H4] Master Density
Select the standard density to be applied
during creation of the master.
10
Next>
[H5] Print Density Fine Adjustment
Select a Print Density level to match the
master to fine-tune print result.
5
Next>
[H6] First Print Density Adjustment
Select a Print Density level of the first print to
match the master.
This can be selected independent of [H5] Print
Density Fine Adjustment.
5
Next>
1
1
1
Description
Troubleshooting
Values
1 (Light) - 10 (Dark)
1 (Light) - 5 (Dark)
1 (Light) - 5 (Dark)
When a Message Displays
243