Setting Up The Auto-Control Stacking Tray (Optional) - Riso SE 9480 User Manual

Setting up the Auto-control Stacking Tray (Optional)

1
Open the Auto-control Stacking
Tray.
Pull the Auto-control Stacking Tray down until it
comes to a rest.
2
Raise the Receiving Tray Paper
Guides.
3
Raise the Paper Stopper.
The Receiving Tray Paper Guides/Stopper posi-
tions are automatically adjusted for paper size
used.
Note:
• The Receiving Tray Paper Guides/Stopper
positions can be adjusted on the Touch Panel.
p.112
• Pressing the Receiving Tray Paper Guides'
Opening Button during printing moves the
Receiving Tray Paper Guides for about
1 mm ( / ") outward each time.
3
64
4
Adjust the Paper Arrangers.
Push out plates
Alignment of paper is affected by sizes and
strength of paper. Adjust the Paper Arrangers so
that printed paper is aligned.
Press the Paper Arranger to push the plates out,
pull up to pull them in.
For plain paper
Press to open all of the four Paper Arrangers.
For plain paper with images
lopsided on page
Press to open the two Paper Arrangers on the
more heavily printed side.
Basic Operations
Pull In
Preparing to Print
39