Riso SE 9480 User Manual page 47

9
Check the proof copy result.
Select Print Quantity Select Print Quantity
Basic Selections
Print Position
High Speed
Slient
D-Feed D-Feed
Renew Page
Check Check
Black
When a proof copy is printed, the Print Basic
Screen will be displayed automatically.
Check the proof copy; e.g., print position and den-
sity.
If necessary, change the print position and den-
sity.
• Print Position ( p.100)
• Print Density ( p.99)
• Interval ( p.104)
• Jump Wing Control ( p.105)
After adjustment, press the
proof copy.
Important!:
• When the machine has not been used for a long
period of time, the print quality may suffer due
to dry Ink on the Print Drum (Cylinder).
Press the
eral times.
Note:
• You can also adjust the print position, the den-
sity, and the speed while the print process is in
progress.
10
Enter the number of copies using
the Print Quantity Keys.
The specified number is displayed on the Print
Quantity Display.
Note:
• To change the number, press the
then re-enter the correct number.
Functions Admin.
Paper
0.0 mm
A4
0.0 mm
Idle Info
key to print a
key to print proof copies sev-
key,
11
Press the
The specified number of copies will be printed.
Note:
• Press the key to interrupt printing operation
currently underway.
• When printing from a computer, if the machine
is inactive for a certain period of time, it deter-
mines that the current job is completed, even if
the actual printing is still under way. If another
person accidentally initiates another job from
the computer, this will cause a new master to be
made, discarding the current one. To prevent
this, you may set a "Reserve Period". We rec-
ommend that you activate the "Reservation"
setting when printing leaflets, etc. to prevent
interruption.
p.148
• Easily restore the current settings by saving
them into memory. Saved settings can be
retrieved even when the
after turning the power off.
p.140
12
Press the
complete.
The setting returns to its default value.
Note:
• After printing is completed, the master remains
on the Print Drum (Cylinder). To protect confi-
dential documents from unauthorized duplica-
tion, use the "Confidential" feature to discard
the master after printing.
p.147
• Even if you do not press the
passage of a certain amount of time (factory
default settings: 5 minutes), the settings will be
automatically reset.
p.140
Printing from a Paper Document or Book
Basic Operations
key.
RESET
PROOF
START
STOP
key is pressed, or
key when print job is
key, with the
45