Registering A Custom Paper Size [Custom Paper Entry]; Entering Sizes And Changing Names - Riso SE 9480 User Manual

Advanced Features
Registering a Custom Paper Size
[Custom Paper Entry]
Non-standard paper sizes must be pre-entered into memory. Once a paper size is stored into memory, it can be
retrieved with the [Paper] button from the Master Making Basic Screen.
Up to 30 different sizes may be entered. Previously stored sizes can be modified or deleted.
You can register paper sizes between 100 mm × 148 mm (
However, any paper longer than 436 mm (
p.180
Important!:
• Custom paper sizes must be entered. Failure to do so may result in incorrect scanning.

Entering sizes and changing names

1
Touch [Admin.] on the Basic Screen
for each mode.
Ready to Make Master Ready to Make Master
Renew Page
Black
2
Touch [OK].
Ready to Make Master Ready to Make Master
If the Recognition Screen is displayed, follow the
message on the screen. See step 2 in "Customiz-
ing Default Settings". ( p.173)
178

Registering a Custom Paper Size [Custom Paper Entry]

5
17
D-Feed D-Feed
Check Check
" ×
15 13
3 / 5 /
16 16
") prints in extended paper mode.
/
32
3
Touch [System] or
[Custom Paper Entry] on the screen.
Admin. Admin.
Display
Default
System
Editor
4
Touch [Custom Paper Entry].
Admin.
Display
Default
S y s t e m
Editor
") to 340 mm × 555 mm (13
A l l A l l DirectAccess Entry
Selections Entry
Display Priority
Mode Key Pattern
Start-Up Screen
P.1/11
All Custom Paper Entry
Irregular Fitter
Folder Renaming
CI Select
Base IP Address
P .1 / 5
" ×
19 27 ").
/ 21 /
32 32
to display
Mode Screen
Mode Select.
Logo(SE)
OFF
Internal CI