Printing From A Paper Document Or Book - Riso SE 9480 User Manual

Printing from a Paper Document or Book

The steps for scanning an original for printing is explained below.
1
Make sure the machine is ON.
Check the Control Panel.
Note:
• When the power is OFF, both the Display and
the key are off. Turn the power ON.
• If the key is lit, the machine is in Energy
Saving mode. Press the
Energy Saving mode.
2
Check for printing paper.
Make sure the paper is loaded.
To load or to change the paper, see the following page:
p.37
After replacing with paper of a different size,
adjust the position of the Receiving Tray Paper
Guides and Paper Stopper.
p.36
3
Check the Display.
When the Recognition Screen is
displayed.
Follow the message on the screen.
For details, see
The initial screen will be displayed after the
user has been identified.
When the initial screen is displayed
Proceed to step 4.
The initial screen differs depending on the set-
ting of "Display Priority" of "Admin.".
key to cancel
p.114.
4
Touch [MasterMake] on the Opera-
tion Selection Screen.
Select an Operation Mode
RISO SE9380A RISO SE9380A
MasterMake
P r i n t i n g
The Master Making Basic Screen appears.
Ready to Make Master
Basic Selections
Page (A4) Contrast
Auto
L i ne
Multi-Up D-Feed
Check
Print
Black
Note:
• When you see [Data-Map] in the Status Area,
the machine is busy receiving electronic data
from the computer. Please wait a moment.
5
Place the original.
Place the original on the Glass Platen or in the
optional ADF (Auto Document Feeder) unit.
To place the original, see
Printing from a Paper Document or Book
Basic Operations
Functions Admin.
Size Paper
A4
Idl e Info
p.41.
43