Riso SE 9480 User Manual page 81

4
Touch [Ticket].
Ready to Make Master
Multi-Up Print
Basic Selections
Single Multiple
5
Touch [ON].
You can specify the "Page Width".
6
Touch or
edge size of the original (the width).
Close
Functions Admin.
Ticket
P .1 / 4
to specify the short
Printing Multiple Originals on One Sheet [2 Up] [Multi-Up Print]
Functions for Master-Making
Important!:
• If you have enlarged/reduced size in step 8
(setting print functions), be careful about the fol-
lowing points:
– Specify the ticket width after enlarging/reduc-
ing.
– If you magnified the size, make sure that the
bigger size does not exceed the specified
"Page Width" or the short edges of the print
paper.
– When magnifying, make sure to prepare
paper that fits the enlarged size.
7
Touch [OK].
Returns to the Functions Screen. "Multi-Up Tick-
ets" setting is updated.
8
Make necessary settings.
Make various settings as needed.
9
Press the
Starts scanning the original.
After this, please follow the same operations for
normally printing.
Note:
• To cancel a "Multi-Up Print" setting once it has
been confirmed, follow step 2, touch [OFF] and
then [OK] on the screen.
key.
79