Riso SE 9480 User Manual page 84

Functions for Master-Making
1
Set the original and print paper.
Place the original on the Glass Platen or in the
optional ADF unit.
To place the original, see
Important!:
• Be careful with the orientation of the original.
• Make sure to set the printing paper in the orien-
tation shown in the figure below (the long side
points in the direction of transfer).
2
Touch [Layout] on the Functions
Screen.
Ready to Make Master Ready to Make Master
3
Select the page size to use.
Touch the button corresponding to the size of the
original and touch [Next>].
Ready to Make Master Ready to Make Master
82
Laying out continuous originals on one sheet of paper [Layout]
p.41.
Paper output direction
The reproduction size is automatically set and the
Layout Screen is displayed.
4
Touch the button for the number of
images to set.
Touch the button for the number of images to be
laid out and touch [Next>].
Important!:
• Check if the orientation of the originals has
been set in the direction determined for the set
number of images.
Note:
• To cancel the Layout setting, touch [Cancel].
5
Set the orientation of characters of
the original.
Select [Align Top] or [Align Side] for the orienta-
tion of characters on the original seen from the
touch panel side.
6
Touch the layout order button to set.
7
Touch [OK].
"Layout" is set and the Functions Screen appears.