Riso SE 9480 User Manual page 225

Error Number
J00-000
T00-000:Service Call Error (in alphabetical order)
Message
!!Battery Replacement!!
Call Service
!!System Error!!
Press Reset Key
If Recovery has Failed, Call Service
!!System Error!!
Turn Main Power SW OFF Then ON
If Recovery has Failed, Call Service
A00-000:Jam Errors (in alphabetical order)
Message
Master Disposal Error
Pull Out Print Cylinder and
Discard Master
Master Jammed in Disposal Unit
Pull Out Master Disposal Box and
Remove Jammed Master
Master Loading Error
Pull Out Print Cylinder and
Discard Master
Error Types
Displays when an original document or printing
Paper Jam Error
paper is jammed.
Possible Cause
The battery is low or depleted.
A system error has occurred.
Possible Cause
The master was not properly
discarded.
The master is jammed in the
Master Disposal Unit.
The master is not properly
attached to the Print Drum
(Cylinder).
Description
Action
Contact your dealer (or authorized service
representative) and have the battery
replaced.
Press the key or the
the error message display.
Press the key.
If the problem persists, contact your dealer
(or authorized service representative).
Shut off power, then restart.
If the problem persists, contact your dealer
(or authorized service representative).
Action
1)
Pull out the Print Drum (Cylinder) and
remove the master from the Print
Drum (Cylinder).
p.211
2)
Return the Print Drum (Cylinder) in place.
3)
Press the
Pull out the Master Disposal Box and
remove the jammed master.
If the masters are difficult to remove, pull out
the Print Drum (Cylinder) and then remove.
p.209
p.211
If the error persists, contact your dealer (or
authorized service representative).
1)
Pull out the Print Drum (Cylinder) and
remove the master from the Print
Drum (Cylinder).
p.211
2)
Return the Print Drum (Cylinder) in place.
3)
Press the
When a Message Displays
Troubleshooting
Reference
page
p.228
key to clear
key.
key.
223