Paper-Feed And Paper-Ejection Test Modes - Riso CZ180 Series Technical Manual

CHAPTER 14: TEST MODE

4) Paper-feed and Paper-ejection Test Modes

No. Sensors, switches
0600 Paper detection sensor
0602 Elevator upper-limit sensor A
0604 Elevator lower-limit sensor
0605 Paper sensor
0606 Paper-ejection sensor
0612 Paper-ejection FG sensor
No. Motor solenoid system
0660 Paper ejection motor
0661 Suction fan
0662 Separation fan
No.
Paper feed tray maximum up positioning
0681
Raises the paper feed tray to the maximum up position by pressing START key.
Paper feed tray elevation up & down
0682
Raises and lowers the paper-feed tray repeatedly until STOP button is pressed.
Paper feed tray maximum down positioning
0683
Lowers the paper feed tray to the maximum down position by pressing by pressing START key.
Paper-feed clutch ON/OFF action
0688
Presses START key to turn ON the clutch. The clutch automatically switches off after 10 seconds.
Paper sensor sensitivity automatic adjustment
0705
Automatically adjusts the paper sensor sensitivity by activating the test mode with one clean sheet of
white paper of which the operator normally uses.
Elevator motor ON action
Rotates the elevator motor for 10 seconds.
0708
[This test mode is for checking the motor as one independent part. Disconnect the motor from the cutter
unit before activation.]
No. Data check
0722 Paper sensor
No.
Paper-feed-clutch ON angle
Description
0741
Setting
Paper-feed-clutch OFF angle
Description
0742
Setting
Paper feed retries after one paper feed action on 1st paper feed area.
Description
0743
Setting
RISO Inc. Technical Services & Support
Sensor light reflected (paper detected)
Sensor light blocked (Sensor detecting paper feed tray at maximum up
position)
Sensor light blocked (Sensor detecting paper feed tray at maximum down
position)
Sensor light blocked (paper detected)
Sensor light blocked (paper detected)
Sensor light blocked (detecting encoder disc)
Rotates the motor.
Activates the fan.
Activates the fan.
Unit check
Displays the A/D value of the paper sensor.
Data setting
Adjusts the drum angle timing for activating the paper-feed clutch.
Range : -200 to +200
(+ values delay clutch ON timing )
Unit : 5 (0.5°)
Default : 0 (0°)
Adjusts the drum angle timing for deactivating the paper-feed clutch.
Range : -200 to +200
(+ values delay clutch OFF timing )
Unit : 5 (0.5°)
Default : 0 (0°)
Sets the number of times the 1st paper feeding is tried when no paper feed
occurs.
Range : 1 to 3
1: No paper feed retry action. (default)
The machine displays paper feed jam on the first
paper feed try.
2: One more paper feed action.
Paper jam display if no paper feeds after second
paper feed try.
3: Two more tries.
Paper jam display if no paper feed after third
paper feed try.
14 - 12
Detection status
Remarks
Details
(-20.0° to +20.0°)
(-20.0° to +20.0°)
CZ180 / CV1860 Rev. 1.0
US.RISO.COM