Fuser Unit; General Description - Toshiba e-STUDIO200L Service Manual

13. FUSER UNIT

13.1 General Description

In the fuser unit, toner is fused by applying heat and pressure on the transferred image on the trans-
ported paper. The paper is then transported to the paper exit section after completion of fusing. The
fuser unit consists of the heater lamps, fuser roller, pressure roller, separation fingers, cleaning roller,
thermistors, thermostat, etc.
Separation finger
Fuser roller
Center heater lamp
Side heater lamp
Thermostat
Thermistor
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Fig. 13-1
e-STUDIO200L/202L/203L/230/232/233/280/282/283
13 - 1
Paper exit section
Pressure roller
Cleaning roller
Fuser unit
FUSER UNIT
13