(3)
Pull out the finisher while pushing the lever.
(4)
Remove 1 screw and take off the finisher
from the rail.
Note:
Be careful not to fell the finisher when mov-
ing the finisher unit only.
[F] KN-3520 (Bridge unit)
(1)
Turn the power OFF and unplug the power
cable.
(2)
Pull out the finisher from the equipment.
(3)
Remove the stopper.
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Fig. 2-99
Fig. 2-100
Fig. 2-101
e-STUDIO200L/202L/203L/230/232/233/280/282/283
2 - 61
Lever
Rail
Stopper
OUTLINE OF THE MACHINE
2