1.TROUBLESHOOTING FOR THE HARDWARE
2
Open the transport guide holding the green knob and then release the misfed paper.
Be sure not to touch the transfer belt when removing the misfed paper. This could stain copy images.
Do not clean roller [A] though it may be stained. It will be automatically cleaned at the next printing.
Close the automatic duplexing unit cover.
3
Fuser unit
Be careful not to let your fingers be caught between the equipment and the automatic duplexing unit cover.
This could injure you.
Do not touch the fuser unit or the metal portion around it.
Since they are very hot, you could be burned or the shock could cause you to get your hand injured in the machine.
1
Open the automatic duplexing unit cover on the right.
A
A A
Clearing a Paper Misfeed 25