(5)
Remove 1 screw. Take off the bracket fixing
the registration clutch and bushing.
(6)
Disconnect 2 connectors, remove 3 screws,
and then take off the main motor drive unit.
(7)
Loosen 1 fixing screw of the tensioner and
remove the tension spring.
e-STUDIO200L/202L/203L/230/232/233/280/282/283
DRIVE SYSTEM
Bushing
Bracket
Screw
Drive unit
Screw
Tension spring
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved
10 - 6
Fig. 10-5
Screw
Connector
Fig. 10-6
Fixing screw
Fig. 10-7