Disassembly And Replacement - Toshiba e-STUDIO200L Service Manual
Multifunctional digital systems
Hide thumbs
Also See for e-STUDIO200L:
- Service handbook (762 pages) ,
- Service manual (708 pages) ,
- Operator's manual (102 pages)
Table of Contents
Advertisement
11.6 Disassembly and Replacement
[A] Process unit
(1)
Open the bypass tray, ADU and transfer
cover.
(2)
Open the front cover and take off the toner
cartridge.
(3)
Disconnect 1 connector. Loosen 2 screws
and pull out the process unit.
Note:
When installing the process unit, make sure
that the connector (harness) is not caught
under the developer unit.
e-STUDIO200L/202L/203L/230/232/233/280/282/283
DRUM RELATED SECTION
Process unit
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved
11 - 8
04/09
Connector
Fig. 11-6
Hide quick links:
Advertisement
Table of Contents
