Toshiba e-STUDIO200L Service Manual page 128

• Exit sensor detects jamming of the tailing edge of paper.
Registration clutch OFF
Less than 1.759 sec.
Exit sensor OFF
If the exit sensor is not turned OFF after 1.759
sec,
Paper jam (E020)
is stopped.
• Immediately after the power ON
Any of all sensors on paper transport path detects paper (ON)
Paper jam (E030)
• Front cover is opened during copying
Paper jam (E410)
• Registration sensor detects jamming of the leading edge of paper:
Registration sensor is not turned ON in a fixed period of time after the leading edge of paper
passed the 1st transport roller.
Paper jam (E200, E210, E270, E280, E300, E330 and E3C0)
• During paper feeding from ADU:
1st transport sensor is not turned ON in a fixed period of time after the ADU clutch is turned ON.
Paper jam (E110)
• During paper transporting from ADU:
ADU entrance/exit sensors do not detect the paper at the fixed timing
Paper jam (E510 or E520)
e-STUDIO200L/202L/203L/230/232/233/280/282/283
GENERAL OPERATION
The copying operation
4 - 10
Registration clutch
Exit sensor
Timer
Fig. 4-2
© 2004 - 2008 TOSHIBA TEC CORPORATION All rights reserved
OFF
ON
0
1.759sec.
Paper jam (E020)